Clear PMMA Disc —— 98mm for medical thermoplastics

WallaBC PMMA for digital denture bases Clear PMMA is a transparent thermoplastic blanks based on blank based on polymethyl...
Vendor: WallaBC
Availability: In Stock
$12.00
$12.00
Please hurry! Only 100 left in stock
Thickness: 12mm
Subtotal: $12.00
10 customers are viewing this product

Free Shipping

Free standard shipping on orders over $99

Estimated to be delivered on 05/11/2024 - 05/20/2024.

Free Returns

Learn More.

Built And Shipped Within 5 - 7 Bussiness Days

Clear PMMA Disc —— 98mm for medical thermoplastics

Clear PMMA Disc —— 98mm for medical thermoplastics

$12.00

Clear PMMA Disc —— 98mm for medical thermoplastics

$12.00
Thickness: 12mm

WallaBC PMMA for digital denture bases

Clear PMMA is a transparent thermoplastic blanks based on blank based on polymethyl methacrylate (PMMA) and are and is suitable for the fabrication of bite splints. In the CAD/CAM process, you can achieve reproducible results with little post-processing effort.

Benefits:

  •  Very good polishing properties
  •  Very good bond to denture teeth
  •  Available in four colors

Advantages: 

  •  High stability due to high-impact modification
  •  Very good polishability
  •  Can be bonded to conventional acrylics

Physical specifications

Feature Unit Value
Flexural strength [MPa] 65
Flexural modulus [MPa] 2.030
Fracture toughness [MPa m1/2] 2,6
Water absorption  [µg/mm³]  < 24
Solubility [µg/mm³]  < 0,3
Residual monomer content  [%] 

< 0,5

 

Physical specifications

Available Thickness 12 14 16 18 20 22 25 30mm
Available Colors Vita 16 Colors | Bleach Shades |  Clear |  Pink 
Available Available 98mm for Open System |  95mm |  71mm D Shape
Available Monolayer   |  Multilayer  |  Acetal  |  Full Denture


Milling Attention

· The shoulder shall not be prepared in the area of corner and sharp edge. The shoulder shall be prepared in the shape of a round inner edge or inclined surface.

· The space of 1mm is required to be reserved for the preparation of the cutting edge, so as to ensure that the PMMA block can achieve the ideal grinding effect in the process of CAD / CAM. The preparation of the cutting edge should be at the enamel layer, and avoid the preparation at the point or area of stress concentration.

Related Products

Recently Viewed Products